To get rid of contaminants and keep your optic cable functioning optimally you have to clean it regularly.
Tools you need for cleaning
There are many types of tools you need when cleaning the cables. Some of these things include:
Compressed air: Clean dry air is necessary to ensure that the aerosol is free or water, dust, and oil. For ideal results, you should use filtered or canned compressed air. You can easily find the air in your local laboratory supplier or photoshop.
Lens paper: The lens paper is made up of a long fiber that doesn’t have any chemicals. The paper is ideal when you are looking to minimize particulates. You can easily find the lens paper from your local drug store, laboratory supplier, or camera shop.
Methanol: You are discouraged from cleaning the optic cables using chemicals but if you have to, you should go ahead and do it but you should follow the guidelines given by your manufacturer. Just like the other cleaning materials, you can easily find methanol from your local camera shop, pharmacy, or drugstore.
Fiber optic cleaning notes
For ideal results when cleaning the unit you need to observe a number of notes. When cleaning, you should ensure that the fiber optic cable doesn’t come into contact with any surface, including your fingers. You should also avoid bending the cable. This is to avoid breaking the cable which would result in poor performance.
It’s common for optics and optic coating to be easily chipped. To prevent the chips from getting onto your hands you should use finger cots or powder free surgical gloves. To avoid contamination you should only use fresh spectroscopic grade methanol. Before you start the cleaning process, always ensure that the module power is off and the light sources are disabled.
Fiber optic cable cleaning procedure
To achieve ideal results, you should follow a cleaning procedure. You should start with blowing the surface of the fiber optic cable with a stream of clean dry air. This is to dislodge any large, loose particles. You should then place 1-3 drops of methanol at the center of the lens tissue and use it to clean the optical surface. Once you are done examine the optic fiber under high-intensity light using a magnifier. If there are still some contaminants on the surface you should repeat the cleaning process. If clean, immediately install a protective cover.